Question

A network engineer needs to configure a router for Flexible NetFlow IPFIX export. The destination server IP address is 172.17.12.1. The source address must use the Loopback0 IPv4 address, and exported packets must use DSCP CS3. The TTL must be 64, and the transport protocol must use UDP with destination port 4739. Which configuration must the engineer apply on the router?

Accepted Answer

B. configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol ipfix end

Answer

configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 3 ttl 64 export-protocol netflow-v9 transport udp 4739 end

Answer

configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol netflow-v9 transport udp 4739 end

Answer

configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 3 ttl 64 export-protocol ipfix end