Selected Answer: C C Child_SA https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/115936-understanding-ikev2-packet-exch-debug.html

Selected Answer: B The information exchange would carry data exchanged between these two hosts. This would be found in the configuration payload of the INFOMRATION exchange. https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/115936-understanding-ikev2-packet-exch-debug.html

Selected Answer: C per ChatGPT (I know, use it at your own risk...): The second set of traffic selectors negotiated between two peers using IKEv2 will be included in the CREATE_CHILD_SA exchange. This exchange is used to establish a new child SA within an existing IKE SA. The CREATE_CHILD_SA exchange is initiated by the initiator, and the responder replies with a CREATE_CHILD_SA response. The CREATE_CHILD_SA exchange contains the following payloads: Initiator's nonce SA proposal Traffic selector proposal Key exchange data IDi (Initiator's Identification) IDr (Responder's Identification) Authentication data The SA proposal and traffic selector proposal payloads will contain the details of the second set of traffic selectors negotiated between the peers. These proposals will include the specific traffic selectors for the new child SA, such as IP addresses and port numbers.

Selected Answer: C C Create_Child_SA is correct.

C. The IKEv2 CREATE_CHILD_SA packet is used to establish a new security association (SA) between two peers. This packet carries the details of the exchange, including the traffic selectors, the cryptographic algorithms and keys to be used, and any other relevant information.

correct answer is c! The IKEv2 INFORMATIONAL exchange: is used to convey control messages about errors and notifications so answer B is wrong.! The CREATE_CHILD_SA exchange is used to create new Child SAs and to rekey both IKE SAs and Child SAs. The initiator sends a CREATE_CHILD_SA request, containing a list of acceptable proposals for the Child SA. Each proposal defines an acceptable combination of attributes for the Child SA that is being negotiated (AH or ESP SA). The responder picks a proposal that is acceptable and returns the choice to the initiator in the CREATE_CHILD_SA response. The attributes that can be negotiated include the following: -Protocol (AH or ESP) -Authentication algorithm (for example, HMAC-MD5 or -HMAC-SHA) -Encapsulation mode (tunnel or transport) -Encryption algorithm (for example, DES, 3DES or AES) -Diffie-Hellman group information (for example, group 1, group 2, group 5 or group 14)

Selected Answer: C C is correct. Informational is used only for errors, notifications, etc. https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/115936-understanding-ikev2-packet-exch-debug.html

Selected Answer: C C is the correct answer.

C Summary of Packet Flow IKE_SA_INIT: Both peers exchange this packet to start the IKE SA and negotiate parameters. IKE_AUTH: After the initial negotiation, peers authenticate and verify the agreed-upon parameters, establishing the IKE SA. CREATE_CHILD_SA: This packet is used to create and negotiate IPsec SAs for secure data transmission. NOTIFY: Used at any point to communicate status or errors, making sure both sides are informed.