Q2Suite and Device Administration
When deploying an Expressway Core and Expressway Edge cluster for mobile and remote access, which TLS verification subject name must be configured on the Expressway-E UC traversal zone?
← → navigate · a answer
Community votes
Discussion · 11
6
This should be the Expressway-C cluster FQDN.
5
D. Expressway-C FQDN
5
The correct answer is D. Expressway-C Cluster Name
3
D is the correct one, why would exp-e need to know its tls name
3
wrong answer
3
D Expressway C is correct
3
Answer is D.
Explanation: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-8/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-8.pdf
On Expressway E, enter the name to look for in the traversal client's certificate (it must be in either the Subject Common Name or the Subject Alternative Name attributes). If there is a
cluster of traversal clients, specify the cluster
name here and make sure it is included in each client's certificate.
Traversal Client is EXP-C
2
B. Expressway-E Cluster Name
2
It should be D
D 2
Selected Answer: D
On Expressway-E, enter the name to search for in the traversal client's certificate (it must be in the Subject Alternative Name attribute). If there is a cluster of traversal clients, set the cluster name here and make sure it is included in each client's certificate.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/expressway/config_guide/X12-5/exwy_b_mra-expressway-deployment-guide/exwy_b_mra-expressway-deployment-guide_chapter_01000.html
1
@Adminiistrator: Change the correct answer to D! NOT B