ETExamTower
Q9SecurityMultiple answers

Which two conditions can make port 8443 unreachable from the Internet to the Expressway-E? (Choose two.)

Select 2 answers.
← → navigate · a answer
Community votes
E
50% (7)
D
36% (5)
B
14% (2)
A
0% (0)
C
0% (0)
Discussion · 12
6
Either the port is blocked, or the UC traversal zone is down.
6
Traffic is coming from the internet, so it cannot be the cisco_uds record, since it is created on the internal DNS only. Collab_edge is the external DNS record. It has to be port blocked or the traversal zone is down
B, E 5
Selected Answer: BE B and E. Collab-edge is used for MRA, not UDS.
4
https://www.cisco.com/c/en/us/support/docs/unified-communications/expressway/118798-technote-cucm-00.html#anc6 Topic 1 B - The Unified Communications zone is down. E - Firewall is blocking.
B, E 4
Selected Answer: BE It should be BE
D, E 3
Selected Answer: DE Traffic coming through an MRA pair (C&E) DOES use the _cisco-uds record to get from the C to CUCM. B is wrong because there is no unified Communications Zone (there is a UC Traversal zone, close, but different) in the expressway. Since the 8443 traffic is actually destined for CUCM, if the _cisco-uds record is botched, it won't get there...and thus it will be unreachable.
2
Not D, cisco-uds is an internal srv, collab-edge is the external (internet facing) srv record
1
D and E are the correct ones
D, E 1
Selected Answer: DE There is no "Unified Communications zone", B can't be right....you cannot assume it refers to "Unified Communications traversal zone"
D, E 1
Selected Answer: DE there is no unified communications zone, it is definitely DE, the _cisco-uds record must be present
1
Nothing in this link says anything about a "UC Zone". It does mention both the _cisco-uds SRV and firewalls blocking ports,
D, E 1
Selected Answer: DE D & E are correct. The links in the comments do not refer to UC Zone at all.