Q48Cisco Platforms
On a Cisco Catalyst 9300 Series Switch, Guest Shell is used to create a service in a container. Which change is required to allow the service external access?
← → navigate · a answer
Community votes
Discussion · 3
12
Agree with answer 'B'
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/167/b_167_programmability_cg/guest_shell.html
B 2
Selected Answer: B
B is right
### Connectivity via L3 Routed Interface ##
In this setup, the device itself will act as a default gateway for the container. For external connectivity, NAT may be required and can be done on the device itself (with the VirtualPortGroup interface as “inside” and outgoing routing interface as “outside”).
Example:
interface GigabitEthernet1/0/20
ip address dhcp
ip nat outside
!
interface VirtualPortGroup1
ip address 10.1.0.1 255.255.255.0
ip nat inside
!
B 1
Selected Answer: B
Connectivity via L3 Routed Interface
In this setup, the device itself will act as the default gateway for the container. For external connectivity, NAT may be needed and may be performed on the device itself (with the VirtualPortGroup interface as “inside” and the outgoing routing interface as “outside”). Here's an example: