Q15Layer 3 Technologies
Router R1 is configured with a default route as follows: ```text R1#(config) ip route 0.0.0.0 0.0.0.0 10.2.3.1 ``` You want to redistribute this route into OSPF, but when you configure the `redistribute static` command under the OSPF process, the default route does not appear. What will create a default route in the OSPF routing process?
← → navigate · a answer
Community votes
Discussion · 6
4
Keep in mind that `default-information originate` is the command used to advertise a default route in OSPF. There are a number of questions with this answer.
C 3
Selected Answer: C
Agree with the answer
1
IOU1: uter ospf 1
redistribute static
network 10.1.1.0 0.0.0.255 area 0
network 10.3.3.0 0.0.0.255 area 0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 10.2.3.1
IOU2:
show ip route:
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 10.1.1.0/24 is directly connected, Ethernet0/0
L 10.1.1.2/32 is directly connected, Ethernet0/0
O 10.3.3.3/32 [110/11] via 10.1.1.1, 00:04:38, Ethernet0/0
1
router ospf 1
redistribute static
network 10.1.1.0 0.0.0.255 area 0
network 10.3.3.0 0.0.0.255 area 0
default-information originate
IOU2:
show ip route
*E2 0.0.0.0/0 [110/1] via 10.1.1.1, 00:00:18, Ethernet0/0
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 10.1.1.0/24 is directly connected, Ethernet0/0
L 10.1.1.2/32 is directly connected, Ethernet0/0
O 10.3.3.3/32 [110/11] via 10.1.1.1, 00:05:19, Ethernet0/0
1
The redistribute static works for other non-default routes as long as the route is in IOU's RIB table (route table)
1
I meant to say it works for other routes, as long as it's not the default route