Q38Network Assurance
Refer to the exhibit. Which command set must be used to configure and verify router R3 so it measures response time from router R3 to the file server in the data center?
← → navigate · a answer
Discussion · 8
5
It doesn't matter if you start with: "life forever", or "start-time now", the command will work in both cases, verified using gns3.
4
B.
cisco_R3(config)#do s runn | s ip sla
track 1 ip sla 1
ip sla 6
icmp-echo 2.2.2.2 source-ip 3.3.3.3
frequency 3000
ip sla schedule 6 life forever start-time now
cisco_R3(config)#do s ip sla stat 6
IPSLAs Latest Operation Statistics
IPSLA operation id: 6
Latest RTT: 3 milliseconds
Latest operation start time: 12:57:15 UTC Thu Dec 22 2022
Latest operation return code: OK
Number of successes: 1
Number of failures: 0
Operation time to live: Forever
cisco_R3(config)#do s ip sla summ
IPSLAs Latest Operation Summary
Codes: * active, ^ inactive, ~ pending
ID Type Destination Stats Return Last
(ms) Code Run
-----------------------------------------------------------------------
*6 icmp-echo 2.2.2.2 RTT=3 OK 55 seconds ag
o
cisco_R3(config)#
2
B though not fully complete.
2
Surprisingly, Cisco easily has you rule out two answers
There's nothing here about 172.29.139.x, not even the WAN.
Unless there is a typo in the exhibit.
1
I think something is wrong with the question and the answers.
Besides that i think answer is B BUT the "ip sla schedule 6 life forever start-time now" ---- > "ip sla schedule 6 start-time now life forever"
1
wrong answers
1
B is the correct answer, if the Source IP address is 10.0.3.3.
None of the options have the right Source IP address.
1
It is 10.0.0.3 as the source. The question asks about R3 to file server, not switch to file server.
10.0.0.3 is the WAN IP of Router 3.
10.0.3.3 is the LAN subnet in Branch 2.