200-301 question 122: Refer to the exhibit. Wireless LAN access must be configured to req…

Q114Network Access

Refer to the exhibit. Wireless LAN access must be configured to require all clients from the NA WLAN to authenticate against the local database. The WLAN is configured for local EAP authentication. User access to the network must not be time-limited. Which action completes this configuration?

← → navigate · a answer

Community votes

62% (8)

38% (5)

0% (0)

Discussion · 19

B 10

Selected Answer: B Lifetime valid range is 60 to 2,592,000 seconds, default is 86,400 seconds. For unlimited time Guest User has to be unchecked, https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_0101100.pdf Regards

B 6

Selected Answer: B Nope, uncheck the Guest User box and the Lifetime will disappear. A. Check the Guest User Role check box. B. Uncheck the Guest User check box. C. Set the Lifetime (seconds) value to 0. D. Clear the Lifetime (seconds) value.

B 5

Selected Answer: B To set up the wireless LAN access to force all clients to authenticate against the local database using local EAP authentication and let access at any time, you need to uncheck the Guest User check box. This makes sure that all users are required to authenticate against the local database, and not just guests.

C 4

Selected Answer: C https://community.cisco.com/t5/wireless/guest-user-account-lifetime/td-p/2552337 https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/wireless/controller/8-1/configuration-guide/b_cg81/b_cg81_chapter_011.html.xml

B 3

Selected Answer: B Should be "B"

B 3

Selected Answer: B Please read carefully, it's not only about lifetime: "force all clients from the NA WLAN to authenticate against the local database"

it should have been a two answer question

lifetime Specifies the lifetime. lifetime Lifetime value (60 to 259200 or 0) in seconds for the guest user. Note A value of 0 indicates an unlimited lifetime. https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/command/reference/consolidated/b_cr74_CONSOLIDATED/cr74_chapter_0101.html

B 2

Selected Answer: B The answer is B

C 2

Selected Answer: C C is right because If you want unlimited access (i.e., no time restriction on authentication), you must set the Lifetime value to 0. B is not correct because Checking or unchecking "Guest User" only affects how the user is classified but does not impact session lifetime.

Running with this.

C 1

Selected Answer: C C is correct

when you uncheck the guest box will you still have guests ? if yes then its the answer if we wont have guests after unchecking then the correct answer should be setting the timer to 0

I agree with B to force all clients to authenticate.

Ifyouareaddinganewuser,selecttheGuestUsercheckboxifyouwanttolimittheamountoftimethattheuserhas accesstothelocalnetwork.Thedefaultsettingisunselected. Step6 IfyouareaddinganewuserandyouselectedtheGuestUsercheckbox,entertheamountoftime(inseconds)that theguestuseraccountistoremainactiveintheLifetimetextbox.Thevalidrangeis60to2,592,000seconds(30days) inclusive,andthedefaultsettingis86,400seconds.

C 1

Selected Answer: C C is the correct answer

B 1

Selected Answer: B [ lifetime(seconds) ] option is valid for guest only, by checking (guest user) you are declaring user is a guest and you want to limit lifetime. A,C,D are incorrect.

Grok it...it's C

C 1

Selected Answer: C I am going with C